Correct Operation of Rubber Track

We have also learned a lot about rubber tracks before this, so this time the editor will lead you to know some correct operation methods of rubber tracks and maintenance items of rubber tracks. Let’s study in depth together.

Tools/Materials

• Correct operation of rubber track
• Maintenance of rubber track

Method/Step

Use a jack to jack up the frame of the combine harvester, loosen the track tightening device, insert the track into the walking mechanism composed of driving wheels, supporting wheels, balance wheels, supporting wheels, guide wheels, etc., and then tighten the track.

When tensioning the track, master the tightness of the track. If the track is too tight, the power loss of the combine harvester will be large, the wear of the track will increase, and the pitch of the track will increase.

Which will easily cause chapping of the belt body and affect the service life of the track; Derailment affects both steering and normal driving.

Tracks should be used with caution

1. Do not make sharp turns on concrete ground, gravel roads, or hard roads, so as not to accelerate the wear of the track, causing the belt body to be twisted and cracked.
2. Try not to work on the rotten fields, so as not to cause the track to slip, affect the normal operation, and increase the wear of the track Amazon Discount Code NHS.
3. When stones or foreign objects enter the gap between the track and the underframe, stop immediately and remove the stones or foreign objects.

The Maintenance of the track should be timely.

1. After working on the beach or in fields sprinkled with chemicals, the tracks should be washed in time.
2. To remove mud grass, stones and sundries on the track at any time.
3. Avoid sticking oil, solvent, salt, etc. on the track, and clean it in time if it sticks.
4. Always check the operation of the various auxiliary parts between the crawlers, and replace them in time if they are severely worn.
5. When the track is stored for a long time, the dirt and sundries on the track should be washed and dried and stored overhead.

The Tightness of the Track Should be Adjusted Appropriately.

If the track is too tight, the power loss of the combine harvester will be large, the wear of the track will increase, and the pitch of the track will increase.

Which will easily cause cracks in the belt body and affect the service life of the track; Faults such as track derailment affect the normal operation of the combine harvester. It must be adjusted according to the requirements of the combine harvester manual Nespresso NHS discount.

Related Experience

• How to use AI to draw 3D effect clouds
• How does Kujiale add gradient transitions when editing pictures into films
• 3ds max uses the section tool
• How to draw and render pyramids in Rhinoceros
• How to improve the real-time rendering effect of KeyShot

Maintenance method of rubber track

I think everyone is more interested in rubber tracks, so how to use rubber tracks correctly? Have you guys understood it? Next, please follow the editor to learn more about it.

Detail

1. After working on the beach or in fields sprinkled with chemicals, the tracks should be washed in time.
2. To remove mud grass, stones and sundries on the track at any time.
3. Avoid sticking oil, solvent, salt, etc. on the track, and clean it in time if it sticks.
4. Always check the operation of the various auxiliary parts between the crawlers, and replace them in time if they are severely worn.
5. When the track is stored for a long time, the dirt and sundries on the track should be washed and dried and stored overhead.
6. It is forbidden to turn sharply on concrete ground or hard roads, otherwise it will cause the track core to be worn and the belt body to be twisted.
7. When crossing the field ridge, it must be at right angles to the field ridge and move forward at a low speed. A springboard is required to cross the field ridge with a height of more than 10 cm. Otherwise the track will fall off or be damaged.

More Tips

1. It is forbidden to walk for a long time and make sharp turns on the gravel road. Otherwise, it will speed up, the track will wear out, and the track will be cracked.
2. Do not work on rotten fields, otherwise, the track will slip and the walking mechanism will accumulate mud and grass, which will affect normal work.
3. If stones or foreign objects enter between the track and the underframe. The operation should be stopped immediately and the stones or foreign objects should be removed.
4. After working on the beach or in the fields sprinkled with chemicals, the tracks should be washed in time.
5. If the track is too tight, the power loss of the combine harvester will be large. The wear of the track will increase, and the pitch of the track will increase.
6. Which will easily cause cracks in the belt body and affect the service life of the track. Faults such as track derailment affect the normal operation of the combine harvester. It needs to be adjusted according to the requirements of the combine harvester manual.

Scope of application of rubber track chassis

The next thing we need to understand together is the relevant knowledge points of the rubber track chassis. The friends also have some understanding of the rubber track chassis.

So this time let’s take a look at the scope of application of the rubber track chassis and what we should do in normal times. How to check it?

Explanation

The track chassis assembly is mainly used for special occasions. Such as military parades, tanks, armoured vehicles, etc. So what are its advantages: rubber track has the ability to protect the ground. Rubber track walking system, low noise, small vibration, comfortable ride, etc.

Advantages, it is suitable for occasions with many high-speed transfers, and realizes all-road passing performance. Reliable electrical instruments and machine status monitoring systems provide a reliable guarantee for the correct operation of the driver.

In addition to being used in the military, it is also used in large machinery. Such as tracked vehicles such as excavators, and its functionality and role are the same.

In addition, tracked chassis are generally heavy armoured vehicles or tanks. Which consume a lot of fuel, rely heavily on logistics, and have better passing performance than wheeled vehicles. It has high requirements for air transportation and must be carried by heavy-duty transport aircraft.